Imagine you’re at your 4th grader’s first school musical. You’re about 6 rows back, the room is packed, and there are at least 10 potential heads in the way of your shot. But you’re excited because you’ve got your new camera and an 18-55mm lens.

You’re child’s on stage, you’re shot is set, you press the shutter button half way to focus, and your camera keeps locking focus on the back of a head two rows up. Frustrated yet? I’ve seen photos that end up like that. I can tell what the intended subject was, but its clear the camera  wasn’t making the connect. So did you blow all that money on a camera that wasn’t going to get the job done? Nope. You just need to bump up the knowledge of what that camera is capable of and figure out how to master it…and don’t worry, it’s not too tough.

Out of Automatic (kindof)

First thing you’ll need to do is get out of Auto mode. If you’re just getting started, and don’t have the basics of shooting manually down, P or Programmed Auto mode is the simplest place to start. Read about B&H Photo & Video’s article explaining camera modes and Canon’s article titled “Why P-Mode?“.

Canon t4i focus points

Nikon D3200/D3300 Focus points

Your camera has a series of focus points. Different cameras have different amounts. Usually, the more expensive the camera, the more focus points. When you look through your viewfinder you’ll see a layout of squares. When you press your shutter half-way, one or all will turn red. When you switched to Program mode, you opened up your ability to set a specific focus point.

Changing Focus Points

On a Canon EOS Rebel Series camera (t1i – t6i) press the right-most button on the back of the camera (fig. 1), then move the selector wheel (fig. 2) until your focus point is in the desired location. Press the shutter button half-way to lock focus, then take your shot. This will allow you to set your focus on a subject in the background while not focusing on the foreground. (Remember your child on the stage and the heads in the way?)

On a Nikon D3— or D5— series camera, choose an auto-focus area other than “E” (Auto-area AF). (Check your Camera Manual’s section on Autofocus on the specifics of this). Then use the multi-selector (Fig. 3) to choose a focus point. Press the shutter half-way to lock your focus, then take your shot.

Fig. 3

Fig. 3

 

Practice

Like the old adage says, “Anything worth doing is worth doing well”. Are you sitting around at home before bed, browsing Facebook or reading blogs? Grab your camera and practice. You don’t even need to take a shot. Just practice the process of switching focus points and locking in your focus. Then step it up and chase your kids around the house, lock in your focus and take the shot. The more you practice, the more comfortable you’ll be.

Go give it a shot and have fun!

 

Leave a Reply

Your email address will not be published. Required fields are marked *